{"id":717518241819,"title":"316 Stainless Steel Tactile. Solid Carborundum in-filled Flat Surface","handle":"solid-carborundum-in-filled-flat-surface-316-stainless-steel","description":"\u003cp\u003e\u003cspan\u003eSolid Carborundum in-filled 316 Stainless steel, flat surface\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCode: T05 Black or T05 Yellow \u003c\/li\u003e\n\u003cli\u003eType: Warning tactile \u003c\/li\u003e\n\u003cli\u003eMaterial: Solid 316 Stainless Steel with Black or Yellow Carborundum Insert\u003c\/li\u003e\n\u003cli\u003eDimensions: Outer Diameter 35mm x top diameter 25mm x Height 4.5mm \u003c\/li\u003e\n\u003cli\u003eSlip Rating: P5 (test report available on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduced by CNC machine with milling finishTactile head will not separate from its anchor \u003c\/li\u003e\n\u003cli\u003e8 Year warranty\u003c\/li\u003e\n\u003cli\u003eCorrosion Proof\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Compliance\u003c\/strong\u003e \u003cbr\u003eFloorsafe Australia’s T05 Carborundum Stainless Steel Tactiles comply with the following standards\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e National Construction Code \u003c\/li\u003e\n\u003cli\u003eSection D3.8\u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 1428.1 2009 – Design for access and mobility – Design for access and mobility: General requirements for access – New building works\u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 1428.4.1 2009 – Design for access and mobility – Means to assist the orientation of people with vision impairment: Tactile ground surface indicators \u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 4586 - 2013 – Slip resistance classification of new pedestrian surface materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e \u003cbr\u003eMake sure you remove any debris \u0026amp; dust and make sure the surface is completely dry\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e A light sandpapering applied to the back of the Tactile will also assist adhesion.\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Use masking tape to mark the area where the tactiles have to be installed.\u003c\/p\u003e\n\u003cp\u003e2. Place the template into position and tape corners to hold the template firm.\u003c\/p\u003e\n\u003cp\u003e3. Remove the plastic cover plug from the top of the Tactile adhesive cartridge. Fit the long stem plastic mixing nozzle onto the end of the cartridge as printed on the cartridge instructions.\u003c\/p\u003e\n\u003cp\u003e4. Place a small amount (Tin Tac size ) of the adhesive into the centre of each circle.\u003c\/p\u003e\n\u003cp\u003e5. Place the Tactile into position and turn the stud a half a turn to allow the glue to spread under.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Too much adhesive will spread outside of the Tactile and show. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e6. Once the template is complete with the tactiles very carefully lift and remove it\u003c\/p\u003e\n\u003cp\u003e7. To continue place the first 3 circle rows on the template over the last 3 rows of completed tactiles. This will make sure the line is running straight. Continue as item 4.\u003c\/p\u003e\n\u003cp\u003e8. Upon completion remove the mixing nozzle and replace the cap back onto the top of the cartridge for further use at a later stage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLuminance Contrast\u003c\/strong\u003e \u003cbr\u003eThe Building Code of Australian\/New Zealand and the AS\/NZS 1428.4.1 require a minimum luminance contrast of 30%. Guidelines are as follows\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated tactile indicators – not less than 30% across the entire area \u003c\/li\u003e\n\u003cli\u003eDiscrete (individual) tactile indicators – not less than 45%\u003c\/li\u003e\n\u003cli\u003eWhere Discrete tactile indicators are constructed of two colours or materials the raised section shall have a minimum contrast of 60% \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTest - AS.NZS 1428.4.1 2009 Appendix E (pg 70-77)\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2018-03-22T16:13:57+11:00","created_at":"2018-03-22T16:18:57+11:00","vendor":"Floorsafe","type":"Tactile","tags":["Manufacturer_Floorsafe"],"price":248,"price_min":248,"price_max":248,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6565695782939,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"SITE-T05BLK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"316 Stainless Steel Tactile. Solid Carborundum in-filled Flat Surface - Black","public_title":"Black","options":["Black"],"price":248,"weight":0,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":6565695881243,"title":"Yellow","option1":"Yellow","option2":null,"option3":null,"sku":"SITE-T05YLW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"316 Stainless Steel Tactile. Solid Carborundum in-filled Flat Surface - Yellow","public_title":"Yellow","options":["Yellow"],"price":248,"weight":0,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2402\/1573\/products\/t05-solid-carborundum-in-filled-flat-surface-01.jpg?v=1521695950"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2402\/1573\/products\/t05-solid-carborundum-in-filled-flat-surface-01.jpg?v=1521695950","options":["Colour of Insert"],"media":[{"alt":null,"id":746023321690,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2402\/1573\/products\/t05-solid-carborundum-in-filled-flat-surface-01.jpg?v=1569042782"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2402\/1573\/products\/t05-solid-carborundum-in-filled-flat-surface-01.jpg?v=1569042782","width":800}],"content":"\u003cp\u003e\u003cspan\u003eSolid Carborundum in-filled 316 Stainless steel, flat surface\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCode: T05 Black or T05 Yellow \u003c\/li\u003e\n\u003cli\u003eType: Warning tactile \u003c\/li\u003e\n\u003cli\u003eMaterial: Solid 316 Stainless Steel with Black or Yellow Carborundum Insert\u003c\/li\u003e\n\u003cli\u003eDimensions: Outer Diameter 35mm x top diameter 25mm x Height 4.5mm \u003c\/li\u003e\n\u003cli\u003eSlip Rating: P5 (test report available on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduced by CNC machine with milling finishTactile head will not separate from its anchor \u003c\/li\u003e\n\u003cli\u003e8 Year warranty\u003c\/li\u003e\n\u003cli\u003eCorrosion Proof\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Compliance\u003c\/strong\u003e \u003cbr\u003eFloorsafe Australia’s T05 Carborundum Stainless Steel Tactiles comply with the following standards\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e National Construction Code \u003c\/li\u003e\n\u003cli\u003eSection D3.8\u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 1428.1 2009 – Design for access and mobility – Design for access and mobility: General requirements for access – New building works\u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 1428.4.1 2009 – Design for access and mobility – Means to assist the orientation of people with vision impairment: Tactile ground surface indicators \u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 4586 - 2013 – Slip resistance classification of new pedestrian surface materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e \u003cbr\u003eMake sure you remove any debris \u0026amp; dust and make sure the surface is completely dry\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e A light sandpapering applied to the back of the Tactile will also assist adhesion.\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Use masking tape to mark the area where the tactiles have to be installed.\u003c\/p\u003e\n\u003cp\u003e2. Place the template into position and tape corners to hold the template firm.\u003c\/p\u003e\n\u003cp\u003e3. Remove the plastic cover plug from the top of the Tactile adhesive cartridge. Fit the long stem plastic mixing nozzle onto the end of the cartridge as printed on the cartridge instructions.\u003c\/p\u003e\n\u003cp\u003e4. Place a small amount (Tin Tac size ) of the adhesive into the centre of each circle.\u003c\/p\u003e\n\u003cp\u003e5. Place the Tactile into position and turn the stud a half a turn to allow the glue to spread under.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Too much adhesive will spread outside of the Tactile and show. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e6. Once the template is complete with the tactiles very carefully lift and remove it\u003c\/p\u003e\n\u003cp\u003e7. To continue place the first 3 circle rows on the template over the last 3 rows of completed tactiles. This will make sure the line is running straight. Continue as item 4.\u003c\/p\u003e\n\u003cp\u003e8. Upon completion remove the mixing nozzle and replace the cap back onto the top of the cartridge for further use at a later stage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLuminance Contrast\u003c\/strong\u003e \u003cbr\u003eThe Building Code of Australian\/New Zealand and the AS\/NZS 1428.4.1 require a minimum luminance contrast of 30%. Guidelines are as follows\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated tactile indicators – not less than 30% across the entire area \u003c\/li\u003e\n\u003cli\u003eDiscrete (individual) tactile indicators – not less than 45%\u003c\/li\u003e\n\u003cli\u003eWhere Discrete tactile indicators are constructed of two colours or materials the raised section shall have a minimum contrast of 60% \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTest - AS.NZS 1428.4.1 2009 Appendix E (pg 70-77)\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e"}

316 Stainless Steel Tactile. Solid Carborundum in-filled Flat Surface

Product Description

Solid Carborundum in-filled 316 Stainless steel, flat surface

Technical Data 

  • Code: T05 Black or T05 Yellow 
  • Type: Warning tactile 
  • Material: Solid 316 Stainless Steel with Black or Yellow Carborundum Insert
  • Dimensions: Outer Diameter 35mm x top diameter 25mm x Height 4.5mm 
  • Slip Rating: P5 (test report available on request)

Features 

  • Produced by CNC machine with milling finishTactile head will not separate from its anchor 
  • 8 Year warranty
  • Corrosion Proof

Compliance
Floorsafe Australia’s T05 Carborundum Stainless Steel Tactiles comply with the following standards

  •  National Construction Code 
  • Section D3.8
  • Australian/New Zealand Standard 1428.1 2009 – Design for access and mobility – Design for access and mobility: General requirements for access – New building works
  • Australian/New Zealand Standard 1428.4.1 2009 – Design for access and mobility – Means to assist the orientation of people with vision impairment: Tactile ground surface indicators 
  • Australian/New Zealand Standard 4586 - 2013 – Slip resistance classification of new pedestrian surface materials

Installation Instructions
Make sure you remove any debris & dust and make sure the surface is completely dry
 A light sandpapering applied to the back of the Tactile will also assist adhesion.

1. Use masking tape to mark the area where the tactiles have to be installed.

2. Place the template into position and tape corners to hold the template firm.

3. Remove the plastic cover plug from the top of the Tactile adhesive cartridge. Fit the long stem plastic mixing nozzle onto the end of the cartridge as printed on the cartridge instructions.

4. Place a small amount (Tin Tac size ) of the adhesive into the centre of each circle.

5. Place the Tactile into position and turn the stud a half a turn to allow the glue to spread under.

NOTE: Too much adhesive will spread outside of the Tactile and show.

6. Once the template is complete with the tactiles very carefully lift and remove it

7. To continue place the first 3 circle rows on the template over the last 3 rows of completed tactiles. This will make sure the line is running straight. Continue as item 4.

8. Upon completion remove the mixing nozzle and replace the cap back onto the top of the cartridge for further use at a later stage.

Luminance Contrast
The Building Code of Australian/New Zealand and the AS/NZS 1428.4.1 require a minimum luminance contrast of 30%. Guidelines are as follows

  • Integrated tactile indicators – not less than 30% across the entire area 
  • Discrete (individual) tactile indicators – not less than 45%
  • Where Discrete tactile indicators are constructed of two colours or materials the raised section shall have a minimum contrast of 60% 
Test - AS.NZS 1428.4.1 2009 Appendix E (pg 70-77)
    Sku: SITE-T05BLK
    Vendor: Floorsafe
    Colour of Insert
    Black
    Yellow
    Maximum quantity available reached.

    Related Products