{"id":719247212571,"title":"Polyurethane Self Stick Tactile Pad 300mm x 600mm","handle":"300-x-600-hazardous-self-stick-tactile-pad","description":"\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCode: T19\u003c\/li\u003e\n\u003cli\u003eType: Warning tactile\u003c\/li\u003e\n\u003cli\u003eMateria\u003cstrong\u003el:\u003c\/strong\u003e Polyurethane\u003c\/li\u003e\n\u003cli\u003eDensity\u003cstrong\u003e:\u003c\/strong\u003e1390 Kg\/m³\u003c\/li\u003e\n\u003cli\u003eHeat Transfer Coefficient\u003cstrong\u003e:\u003c\/strong\u003e 0.16W\/(m.K)\u003c\/li\u003e\n\u003cli\u003eMelting Point: 250°C\u003c\/li\u003e\n\u003cli\u003eEffective Head of Combustion\u003cstrong\u003e:\u003c\/strong\u003e 17.95 MJ\/KG\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 50-80MPa\u003c\/li\u003e\n\u003cli\u003eElongation at break: 20-40%\u003c\/li\u003e\n\u003cli\u003eNotch Test: 2-5 Kj\/m²\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2900-3300 Mpa\u003c\/li\u003e\n\u003cli\u003eDimensions: 300mm x 300mm x 7mm - 2mm Base\u003c\/li\u003e\n\u003cli\u003eSlip Rating: P5 (test report available on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eMust be applied to a clean, dry and smooth surface. Newly laid surfaces must have a minimum of 30 days curing time before laying pads. A moisture test is advisable as Floorsafe Australia will not be held responsible if pads lift\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColours available\u003cstrong\u003e:\u003c\/strong\u003e Yellow and Black\u003c\/li\u003e\n\u003cli\u003eFast and easy to install\u003c\/li\u003e\n\u003cli\u003eMinimal downtime – can be walked on immediately\u003c\/li\u003e\n\u003cli\u003eSuitable for concrete, timber, vinyl and all smooth hard floor surfaces\u003c\/li\u003e\n\u003cli\u003eEnhanced bonding technique – Floorsafe surface primer is supplied with all orders\u003c\/li\u003e\n\u003cli\u003eUV stable (please note grey and terracotta will fade in direct sunlight)\u003c\/li\u003e\n\u003cli\u003e5-year product warranty under normal conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003cbr\u003e Make sure you remove any debris \u0026amp; dust and make sure the surface is completely dry.\u003cbr\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eIMPORTANT: Please use the Surface Primer supplied. It is advisable to keep the pads warm as this will assist in achieving an instant bond. The warmer they are the better the adhesion will be.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Place the Tactile pads into position leaving a 1- 2mm gap for expansion.\u003c\/p\u003e\n\u003cp\u003e2. Apply masking tape as close as possible to around the edges of the pads\u003c\/p\u003e\n\u003cp\u003e3. Remove pads and apply the Surface Primer onto the surface and up to the edge of the masking tape allowing the primer to soak in.\u003c\/p\u003e\n\u003cp\u003e4. Leave primer to dry between 15 – 30 minutes pending on conditions.\u003c\/p\u003e\n\u003cp\u003e5. Remove backing paper from the tactile pad and place into position leaving a 1-2mm gap. Tap down firmly with rubber hammer.\u003c\/p\u003e\n\u003cp\u003e6. Once the area is completed remove the masking tape\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Compliance\u003c\/strong\u003e\u003cbr\u003e Floorsafe Australia’s T19 self-Stick Tactiles comply with the following standards\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNational Construction Code \u003c\/li\u003e\n\u003cli\u003eSection D3.8\u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 1428.1 2009 – Design for access and mobility – Design for access and mobility: General requirements for access – New building works \u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 1428.4.1 2009 – Design for access and mobility – Means to assist the orientation of people with vision impairment: Tactile ground surface indicators \u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 4586 - 2013 – Slip resistance classification of new pedestrian surface materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eLuminance Contrast\u003c\/strong\u003e\u003cbr\u003e The Building Code of Australian\/New Zealand and the AS\/NZS 1428.4.1 require a minimum luminance contrast of 30%. Guide lines are as follows: \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated tactile indicators – not less than 30% across the entire area\u003c\/li\u003e\n\u003cli\u003eDiscrete (individual) tactile indicators – not less than 45% \u003c\/li\u003e\n\u003cli\u003eWhere Discrete tactile indicators are constructed of two colours or materials the raised section shall have a minimum contrast of 60%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTest - AS.NZS 1428.4.1 2009 Appendix E (pg 70-77)\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2018-03-23T10:27:50+11:00","created_at":"2018-03-23T10:43:40+11:00","vendor":"Floorsafe","type":"Tactile","tags":["Manufacturer_Floorsafe"],"price":5490,"price_min":5490,"price_max":5490,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6543991635995,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"SITE-T19BLK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polyurethane Self Stick Tactile Pad 300mm x 600mm - Black","public_title":"Black","options":["Black"],"price":5490,"weight":800,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":6565170610203,"title":"Yellow","option1":"Yellow","option2":null,"option3":null,"sku":"SITE-T19YLW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polyurethane Self Stick Tactile Pad 300mm x 600mm - Yellow","public_title":"Yellow","options":["Yellow"],"price":5490,"weight":800,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/borderlifting.com.au\/cdn\/shop\/products\/t19-self-stick-tactile-pad-01.jpg?v=1522015870"],"featured_image":"\/\/borderlifting.com.au\/cdn\/shop\/products\/t19-self-stick-tactile-pad-01.jpg?v=1522015870","options":["Colour"],"media":[{"alt":null,"id":746968711258,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/borderlifting.com.au\/cdn\/shop\/products\/t19-self-stick-tactile-pad-01.jpg?v=1522015870"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/borderlifting.com.au\/cdn\/shop\/products\/t19-self-stick-tactile-pad-01.jpg?v=1522015870","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCode: T19\u003c\/li\u003e\n\u003cli\u003eType: Warning tactile\u003c\/li\u003e\n\u003cli\u003eMateria\u003cstrong\u003el:\u003c\/strong\u003e Polyurethane\u003c\/li\u003e\n\u003cli\u003eDensity\u003cstrong\u003e:\u003c\/strong\u003e1390 Kg\/m³\u003c\/li\u003e\n\u003cli\u003eHeat Transfer Coefficient\u003cstrong\u003e:\u003c\/strong\u003e 0.16W\/(m.K)\u003c\/li\u003e\n\u003cli\u003eMelting Point: 250°C\u003c\/li\u003e\n\u003cli\u003eEffective Head of Combustion\u003cstrong\u003e:\u003c\/strong\u003e 17.95 MJ\/KG\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 50-80MPa\u003c\/li\u003e\n\u003cli\u003eElongation at break: 20-40%\u003c\/li\u003e\n\u003cli\u003eNotch Test: 2-5 Kj\/m²\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2900-3300 Mpa\u003c\/li\u003e\n\u003cli\u003eDimensions: 300mm x 300mm x 7mm - 2mm Base\u003c\/li\u003e\n\u003cli\u003eSlip Rating: P5 (test report available on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eMust be applied to a clean, dry and smooth surface. Newly laid surfaces must have a minimum of 30 days curing time before laying pads. A moisture test is advisable as Floorsafe Australia will not be held responsible if pads lift\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColours available\u003cstrong\u003e:\u003c\/strong\u003e Yellow and Black\u003c\/li\u003e\n\u003cli\u003eFast and easy to install\u003c\/li\u003e\n\u003cli\u003eMinimal downtime – can be walked on immediately\u003c\/li\u003e\n\u003cli\u003eSuitable for concrete, timber, vinyl and all smooth hard floor surfaces\u003c\/li\u003e\n\u003cli\u003eEnhanced bonding technique – Floorsafe surface primer is supplied with all orders\u003c\/li\u003e\n\u003cli\u003eUV stable (please note grey and terracotta will fade in direct sunlight)\u003c\/li\u003e\n\u003cli\u003e5-year product warranty under normal conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003cbr\u003e Make sure you remove any debris \u0026amp; dust and make sure the surface is completely dry.\u003cbr\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eIMPORTANT: Please use the Surface Primer supplied. It is advisable to keep the pads warm as this will assist in achieving an instant bond. The warmer they are the better the adhesion will be.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Place the Tactile pads into position leaving a 1- 2mm gap for expansion.\u003c\/p\u003e\n\u003cp\u003e2. Apply masking tape as close as possible to around the edges of the pads\u003c\/p\u003e\n\u003cp\u003e3. Remove pads and apply the Surface Primer onto the surface and up to the edge of the masking tape allowing the primer to soak in.\u003c\/p\u003e\n\u003cp\u003e4. Leave primer to dry between 15 – 30 minutes pending on conditions.\u003c\/p\u003e\n\u003cp\u003e5. Remove backing paper from the tactile pad and place into position leaving a 1-2mm gap. Tap down firmly with rubber hammer.\u003c\/p\u003e\n\u003cp\u003e6. Once the area is completed remove the masking tape\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Compliance\u003c\/strong\u003e\u003cbr\u003e Floorsafe Australia’s T19 self-Stick Tactiles comply with the following standards\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNational Construction Code \u003c\/li\u003e\n\u003cli\u003eSection D3.8\u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 1428.1 2009 – Design for access and mobility – Design for access and mobility: General requirements for access – New building works \u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 1428.4.1 2009 – Design for access and mobility – Means to assist the orientation of people with vision impairment: Tactile ground surface indicators \u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 4586 - 2013 – Slip resistance classification of new pedestrian surface materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eLuminance Contrast\u003c\/strong\u003e\u003cbr\u003e The Building Code of Australian\/New Zealand and the AS\/NZS 1428.4.1 require a minimum luminance contrast of 30%. Guide lines are as follows: \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated tactile indicators – not less than 30% across the entire area\u003c\/li\u003e\n\u003cli\u003eDiscrete (individual) tactile indicators – not less than 45% \u003c\/li\u003e\n\u003cli\u003eWhere Discrete tactile indicators are constructed of two colours or materials the raised section shall have a minimum contrast of 60%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTest - AS.NZS 1428.4.1 2009 Appendix E (pg 70-77)\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e"}

Polyurethane Self Stick Tactile Pad 300mm x 600mm

Product Description

Technical Data

  • Code: T19
  • Type: Warning tactile
  • Material: Polyurethane
  • Density:1390 Kg/m³
  • Heat Transfer Coefficient: 0.16W/(m.K)
  • Melting Point: 250°C
  • Effective Head of Combustion: 17.95 MJ/KG
  • Tensile Strength: 50-80MPa
  • Elongation at break: 20-40%
  • Notch Test: 2-5 Kj/m²
  • Young's Modulus: 2900-3300 Mpa
  • Dimensions: 300mm x 300mm x 7mm - 2mm Base
  • Slip Rating: P5 (test report available on request)

Must be applied to a clean, dry and smooth surface. Newly laid surfaces must have a minimum of 30 days curing time before laying pads. A moisture test is advisable as Floorsafe Australia will not be held responsible if pads lift

Features

  • Colours available: Yellow and Black
  • Fast and easy to install
  • Minimal downtime – can be walked on immediately
  • Suitable for concrete, timber, vinyl and all smooth hard floor surfaces
  • Enhanced bonding technique – Floorsafe surface primer is supplied with all orders
  • UV stable (please note grey and terracotta will fade in direct sunlight)
  • 5-year product warranty under normal conditions

Installation Instructions
Make sure you remove any debris & dust and make sure the surface is completely dry.
IMPORTANT: Please use the Surface Primer supplied. It is advisable to keep the pads warm as this will assist in achieving an instant bond. The warmer they are the better the adhesion will be.

1. Place the Tactile pads into position leaving a 1- 2mm gap for expansion.

2. Apply masking tape as close as possible to around the edges of the pads

3. Remove pads and apply the Surface Primer onto the surface and up to the edge of the masking tape allowing the primer to soak in.

4. Leave primer to dry between 15 – 30 minutes pending on conditions.

5. Remove backing paper from the tactile pad and place into position leaving a 1-2mm gap. Tap down firmly with rubber hammer.

6. Once the area is completed remove the masking tape

Compliance
Floorsafe Australia’s T19 self-Stick Tactiles comply with the following standards

  • National Construction Code 
  • Section D3.8
  • Australian/New Zealand Standard 1428.1 2009 – Design for access and mobility – Design for access and mobility: General requirements for access – New building works 
  • Australian/New Zealand Standard 1428.4.1 2009 – Design for access and mobility – Means to assist the orientation of people with vision impairment: Tactile ground surface indicators 
  • Australian/New Zealand Standard 4586 - 2013 – Slip resistance classification of new pedestrian surface materials
Luminance Contrast
The Building Code of Australian/New Zealand and the AS/NZS 1428.4.1 require a minimum luminance contrast of 30%. Guide lines are as follows: 
  • Integrated tactile indicators – not less than 30% across the entire area
  • Discrete (individual) tactile indicators – not less than 45% 
  • Where Discrete tactile indicators are constructed of two colours or materials the raised section shall have a minimum contrast of 60%
Test - AS.NZS 1428.4.1 2009 Appendix E (pg 70-77)
    Sku: SITE-T19BLK
    Vendor: Floorsafe
    Colour
    Black
    Yellow
    Maximum quantity available reached.

    Related Products