Directional Pads

Sort by:
Filter
{"id":719218245659,"title":"300 x 300 Directional Self Stick Tactile Pad","handle":"300-x-300-directional-self-stick-tactile-pad","description":"\u003cp\u003e\u003cspan\u003e300 X 300 Peel \u0026amp; Stick Directional Tactile Pads with Surface Primer\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCode: T20\u003c\/li\u003e\n\u003cli\u003eType: Warning tactile \u003c\/li\u003e\n\u003cli\u003eMaterial: Polyurethane \u003c\/li\u003e\n\u003cli\u003eDensity:1390 Kg\/m³ \u003c\/li\u003e\n\u003cli\u003eHeat Transfer Coefficient: 0.16W\/(m.K) \u003c\/li\u003e\n\u003cli\u003eMelting Point: 250°C \u003c\/li\u003e\n\u003cli\u003eEffective Head of Combustion: 17.95 MJ\/KG \u003c\/li\u003e\n\u003cli\u003eTensile Strength: 50-80MPa \u003c\/li\u003e\n\u003cli\u003eElongation at break: 20-40% \u003c\/li\u003e\n\u003cli\u003eNotch Test: 2-5 Kj\/m²\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2900-3300 Mpa\u003c\/li\u003e\n\u003cli\u003eDimensions: 300mm x 300mm x 7mm - 2mm Base \u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cspan style=\"color: #000000;\"\u003eSlip Rating: P5 (test report available on request)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong style=\"color: #ff0000;\"\u003eMust be applied to a clean, dry and smooth surface \u003c\/strong\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong style=\"color: #ff0000;\"\u003e Newly laid surfaces must have a minimum of 30days curing time before laying pads. A moisture test is advisable as Floorsafe Australia will not be held responsible if pads lift\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvaliable in Directional and Hazardous Pads \u003c\/li\u003e\n\u003cli\u003eColours available: yellow, black, grey, ivory, terracotta \u003c\/li\u003e\n\u003cli\u003eFast and easy to install \u003c\/li\u003e\n\u003cli\u003eMinimal downtime – can be walked on immediately \u003c\/li\u003e\n\u003cli\u003eSuitable for concrete, timber, vinyl, and all smooth hard floor surfaces Enhanced bonding technique – Floorsafe surface primer is supplied with all orders\u003c\/li\u003e\n\u003cli\u003eUV stable (please note grey and terracotta will fade in direct sunlight) 5-year product warranty under normal conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003cbr\u003e Make sure you remove any debris \u0026amp; dust and make sure the surface is completely dry.\u003cbr\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eIMPORTANT: Please use the Surface Primer supplied. It is advisable to keep the pads warm as this will assist in achieving an instant bond. The warmer they are the better the adhesion will be\u003c\/strong\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e1. Place the Tactile pads into position leaving a 1- 2mm gap for expansion.\u003c\/p\u003e\n\u003cp\u003e2. Apply masking tape as close as possible to around the edges of the pads\u003c\/p\u003e\n\u003cp\u003e3. Remove pads and apply the Surface Primer onto the surface and up to the edge of the masking tape allowing the primer to soak in.\u003c\/p\u003e\n\u003cp\u003e4. Leave primer to dry between 15 – 30 minutes pending on conditions.\u003c\/p\u003e\n\u003cp\u003e5. Remove backing paper from the tactile pad and place into position leaving a 1-2mm gap. Tap down firmly with rubber hammer.\u003c\/p\u003e\n\u003cp\u003e6. Once the area is completed remove the masking tape\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e \u003cbr\u003eFloorsafe Australia’s T20 self-Stick Tactiles comply with the following standards:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNational Construction Code \u003c\/li\u003e\n\u003cli\u003eSection D3.8 \u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 1428.1 2009 – Design for access and mobility – Design for access and mobility: General requirements for access – New building works \u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 1428.4.1 2009 – Design for access and mobility – Means to assist the orientation of people with vision impairment: Tactile ground surface indicators \u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 4586 - 2013 – Slip resistance classification of new pedestrian surface materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLuminance Contrast\u003c\/strong\u003e \u003cbr\u003eThe Building Code of Australian\/New Zealand and the AS\/NZS 1428.4.1 require a minimum luminance contrast of 30%. Guidelines are as follows\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated tactile indicators – not less than 30% across the entire area \u003c\/li\u003e\n\u003cli\u003eDiscrete (individual) tactile indicators – not less than 45%\u003c\/li\u003e\n\u003cli\u003eWhere Discrete tactile indicators are constructed of two colours or materials the raised section shall have a minimum contrast of 60% Test - \u003cstrong\u003eAS.NZS 1428.4.1 2009 Appendix E (pg 70-77)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-03-23T10:19:59+11:00","created_at":"2018-03-23T10:26:22+11:00","vendor":"Floorsafe","type":"Tactile Pad","tags":["Manufacturer_Floorsafe"],"price":2900,"price_min":2900,"price_max":3390,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6543948775451,"title":"Black \/ 0-49","option1":"Black","option2":"0-49","option3":null,"sku":"SITE-T20D-1-BLK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"300 x 300 Directional Self Stick Tactile Pad - Black \/ 0-49","public_title":"Black \/ 0-49","options":["Black","0-49"],"price":3390,"weight":700,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":6574673559579,"title":"Black \/ 50 or more","option1":"Black","option2":"50 or more","option3":null,"sku":"SITE-T20D-1-BLK-50","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"300 x 300 Directional Self Stick Tactile Pad - Black \/ 50 or more","public_title":"Black \/ 50 or more","options":["Black","50 or more"],"price":2900,"weight":700,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":6574673592347,"title":"Yellow \/ 0-49","option1":"Yellow","option2":"0-49","option3":null,"sku":"SITE-T20D-1-YLW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"300 x 300 Directional Self Stick Tactile Pad - Yellow \/ 0-49","public_title":"Yellow \/ 0-49","options":["Yellow","0-49"],"price":3390,"weight":700,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":6574673625115,"title":"Yellow \/ 50 or more","option1":"Yellow","option2":"50 or more","option3":null,"sku":"SITE-T20D-1-YLW-50","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"300 x 300 Directional Self Stick Tactile Pad - Yellow \/ 50 or more","public_title":"Yellow \/ 50 or more","options":["Yellow","50 or more"],"price":2900,"weight":700,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":6574673657883,"title":"Grey \/ 0-49","option1":"Grey","option2":"0-49","option3":null,"sku":"SITE-T20D-1-GR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"300 x 300 Directional Self Stick Tactile Pad - Grey \/ 0-49","public_title":"Grey \/ 0-49","options":["Grey","0-49"],"price":3390,"weight":700,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":6574673690651,"title":"Grey \/ 50 or more","option1":"Grey","option2":"50 or more","option3":null,"sku":"SITE-T20D-1-GR-50","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"300 x 300 Directional Self Stick Tactile Pad - Grey \/ 50 or more","public_title":"Grey \/ 50 or more","options":["Grey","50 or more"],"price":2900,"weight":700,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":6574673723419,"title":"Ivory \/ 0-49","option1":"Ivory","option2":"0-49","option3":null,"sku":"SITE-T20D-1-IV","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"300 x 300 Directional Self Stick Tactile Pad - Ivory \/ 0-49","public_title":"Ivory \/ 0-49","options":["Ivory","0-49"],"price":3390,"weight":700,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":6574673756187,"title":"Ivory \/ 50 or more","option1":"Ivory","option2":"50 or more","option3":null,"sku":"SITE-T20D-1-IV-50","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"300 x 300 Directional Self Stick Tactile Pad - Ivory \/ 50 or more","public_title":"Ivory \/ 50 or more","options":["Ivory","50 or more"],"price":2900,"weight":700,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":6574673788955,"title":"Terracotta \/ 0-49","option1":"Terracotta","option2":"0-49","option3":null,"sku":"SITE-T20D-1-TER","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"300 x 300 Directional Self Stick Tactile Pad - Terracotta \/ 0-49","public_title":"Terracotta \/ 0-49","options":["Terracotta","0-49"],"price":3390,"weight":700,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":6574673821723,"title":"Terracotta \/ 50 or more","option1":"Terracotta","option2":"50 or more","option3":null,"sku":"SITE-T20D-1-TER-50","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"300 x 300 Directional Self Stick Tactile Pad - Terracotta \/ 50 or more","public_title":"Terracotta \/ 50 or more","options":["Terracotta","50 or more"],"price":2900,"weight":700,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/borderlifting.com.au\/cdn\/shop\/products\/t20d-self-stick-tactile-pads-01.jpg?v=1521761248"],"featured_image":"\/\/borderlifting.com.au\/cdn\/shop\/products\/t20d-self-stick-tactile-pads-01.jpg?v=1521761248","options":["Colour","Quantity"],"media":[{"alt":null,"id":746230349914,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/borderlifting.com.au\/cdn\/shop\/products\/t20d-self-stick-tactile-pads-01.jpg?v=1521761248"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/borderlifting.com.au\/cdn\/shop\/products\/t20d-self-stick-tactile-pads-01.jpg?v=1521761248","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003e300 X 300 Peel \u0026amp; Stick Directional Tactile Pads with Surface Primer\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCode: T20\u003c\/li\u003e\n\u003cli\u003eType: Warning tactile \u003c\/li\u003e\n\u003cli\u003eMaterial: Polyurethane \u003c\/li\u003e\n\u003cli\u003eDensity:1390 Kg\/m³ \u003c\/li\u003e\n\u003cli\u003eHeat Transfer Coefficient: 0.16W\/(m.K) \u003c\/li\u003e\n\u003cli\u003eMelting Point: 250°C \u003c\/li\u003e\n\u003cli\u003eEffective Head of Combustion: 17.95 MJ\/KG \u003c\/li\u003e\n\u003cli\u003eTensile Strength: 50-80MPa \u003c\/li\u003e\n\u003cli\u003eElongation at break: 20-40% \u003c\/li\u003e\n\u003cli\u003eNotch Test: 2-5 Kj\/m²\u003c\/li\u003e\n\u003cli\u003eYoung's Modulus: 2900-3300 Mpa\u003c\/li\u003e\n\u003cli\u003eDimensions: 300mm x 300mm x 7mm - 2mm Base \u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cspan style=\"color: #000000;\"\u003eSlip Rating: P5 (test report available on request)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong style=\"color: #ff0000;\"\u003eMust be applied to a clean, dry and smooth surface \u003c\/strong\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong style=\"color: #ff0000;\"\u003e Newly laid surfaces must have a minimum of 30days curing time before laying pads. A moisture test is advisable as Floorsafe Australia will not be held responsible if pads lift\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvaliable in Directional and Hazardous Pads \u003c\/li\u003e\n\u003cli\u003eColours available: yellow, black, grey, ivory, terracotta \u003c\/li\u003e\n\u003cli\u003eFast and easy to install \u003c\/li\u003e\n\u003cli\u003eMinimal downtime – can be walked on immediately \u003c\/li\u003e\n\u003cli\u003eSuitable for concrete, timber, vinyl, and all smooth hard floor surfaces Enhanced bonding technique – Floorsafe surface primer is supplied with all orders\u003c\/li\u003e\n\u003cli\u003eUV stable (please note grey and terracotta will fade in direct sunlight) 5-year product warranty under normal conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003cbr\u003e Make sure you remove any debris \u0026amp; dust and make sure the surface is completely dry.\u003cbr\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eIMPORTANT: Please use the Surface Primer supplied. It is advisable to keep the pads warm as this will assist in achieving an instant bond. The warmer they are the better the adhesion will be\u003c\/strong\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e1. Place the Tactile pads into position leaving a 1- 2mm gap for expansion.\u003c\/p\u003e\n\u003cp\u003e2. Apply masking tape as close as possible to around the edges of the pads\u003c\/p\u003e\n\u003cp\u003e3. Remove pads and apply the Surface Primer onto the surface and up to the edge of the masking tape allowing the primer to soak in.\u003c\/p\u003e\n\u003cp\u003e4. Leave primer to dry between 15 – 30 minutes pending on conditions.\u003c\/p\u003e\n\u003cp\u003e5. Remove backing paper from the tactile pad and place into position leaving a 1-2mm gap. Tap down firmly with rubber hammer.\u003c\/p\u003e\n\u003cp\u003e6. Once the area is completed remove the masking tape\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompliance\u003c\/strong\u003e \u003cbr\u003eFloorsafe Australia’s T20 self-Stick Tactiles comply with the following standards:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNational Construction Code \u003c\/li\u003e\n\u003cli\u003eSection D3.8 \u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 1428.1 2009 – Design for access and mobility – Design for access and mobility: General requirements for access – New building works \u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 1428.4.1 2009 – Design for access and mobility – Means to assist the orientation of people with vision impairment: Tactile ground surface indicators \u003c\/li\u003e\n\u003cli\u003eAustralian\/New Zealand Standard 4586 - 2013 – Slip resistance classification of new pedestrian surface materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLuminance Contrast\u003c\/strong\u003e \u003cbr\u003eThe Building Code of Australian\/New Zealand and the AS\/NZS 1428.4.1 require a minimum luminance contrast of 30%. Guidelines are as follows\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated tactile indicators – not less than 30% across the entire area \u003c\/li\u003e\n\u003cli\u003eDiscrete (individual) tactile indicators – not less than 45%\u003c\/li\u003e\n\u003cli\u003eWhere Discrete tactile indicators are constructed of two colours or materials the raised section shall have a minimum contrast of 60% Test - \u003cstrong\u003eAS.NZS 1428.4.1 2009 Appendix E (pg 70-77)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}
300 x 300 Directional Self Stick Tactile Pad

300 x 300 Directional Self Stick Tactile Pad

$33.90

300 X 300 Peel & Stick Directional Tactile Pads with Surface Primer Technical Data  Code: T20 Type: Warning tactile  Material: Polyurethane  Density:1390 Kg/m³  Heat Transfer Coefficient: 0.16W/(m.K)  Melting Point: 250°C  Effective Head of Combustion: 17.95 MJ/KG  Tensile Strength: 50-80MPa  Elongation at break: 20-40%  Notch Test: 2-5 Kj/...

Colour
Black
Yellow
Grey
Ivory
Terracotta
Quantity

More Info
{"id":719198650395,"title":"300 x 600 Directional Silicon Pad","handle":"300-x-600-directional-silicon-pad","description":"\u003cp\u003e\u003cspan\u003e300 x 600 Directional silicon Tactile Tacpads supplied with surface primer \u0026amp; adhesive. Available colours  yellow, grey, white, blue \u0026amp; terracotta.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFloorsafe 300mm x 600mm x 7mm Hazardous \u0026amp; Directional Tactile pads meet the requirements of the Australian standard AS\/NZS4586:2004. Tacpads are an effective and cost-saving way of providing guidance cues. Conforms to the Disability Discrimination Act (DDA) Manufactured to Australian \u0026amp; New Zealand standards 1428.4: 2002 Table 1 Slip tested in accordance with AS\/NZS: 4586:2004 Mean tested BPN 41 Class X Ramp test result R10 Meets the classification Y BPN 25-34 according to AS\/NZS: 4586:2004\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFLEXIBLE \u0026amp; EASY TO INSTALL\u003cbr\u003e\u003c\/strong\u003eFloorsafe silicon coloured tactile Tacpads are supplied with a surface primer \u0026amp; a silicon base adhesive for fast \u0026amp; secured application. Available in 6 colours warning\/hazardous \u0026amp; directional.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSUITABLE SURFACES\u003c\/strong\u003e \u003cbr\u003eSurfaces must be clean \u0026amp; smooth otherwise full bonding will not occur and the pads could lift or bubble. Suitable for smooth concrete, timber, ceramic \u0026amp; vinyl tiles and smooth stone surfaces. We do not recommend installation onto bitumen surfaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eENHANCED BONDING TECHNIQUE\u003cbr\u003e\u003c\/strong\u003eA special primer \u0026amp; adhesive is supplied with the Tacpads. The primer is a white liquid solution that is brushed or rolled onto the surface and left to dry for 10 – 15 minutes before applying the adhesive.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUV STABLE\u003cbr\u003e\u003c\/strong\u003eManufactured from a silicon rubber provides optimum UV stability and wear resistance. No colour fade reported after 48 months\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eOTHER FEATURES\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuaranteed\u003c\/strong\u003e 10 Years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness Shore A\u003c\/strong\u003e 10-90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Strength\u003c\/strong\u003e 11 N\/mm2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElongation at break\u003c\/strong\u003e 100-1100%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum temperature\u003c\/strong\u003e + 300oC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Minimum temperature\u003c\/strong\u003e -120oC\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-03-23T10:10:07+11:00","created_at":"2018-03-23T10:13:51+11:00","vendor":"Floorsafe","type":"Directional Pad","tags":["Manufacturer_Floorsafe"],"price":6590,"price_min":6590,"price_max":6590,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6565215535131,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"SITE-T11BLU","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"300 x 600 Directional Silicon Pad - Blue","public_title":"Blue","options":["Blue"],"price":6590,"weight":800,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":6565215567899,"title":"Yellow","option1":"Yellow","option2":null,"option3":null,"sku":"SITE-T11YLW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"300 x 600 Directional Silicon Pad - Yellow","public_title":"Yellow","options":["Yellow"],"price":6590,"weight":800,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":6565215600667,"title":"Grey","option1":"Grey","option2":null,"option3":null,"sku":"SITE-T11GRY","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"300 x 600 Directional Silicon Pad - Grey","public_title":"Grey","options":["Grey"],"price":6590,"weight":800,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":6565215633435,"title":"White","option1":"White","option2":null,"option3":null,"sku":"SITE-T11WH","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"300 x 600 Directional Silicon Pad - White","public_title":"White","options":["White"],"price":6590,"weight":800,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":6565215666203,"title":"Terracotta","option1":"Terracotta","option2":null,"option3":null,"sku":"SITE-T11TER","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"300 x 600 Directional Silicon Pad - Terracotta","public_title":"Terracotta","options":["Terracotta"],"price":6590,"weight":800,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/borderlifting.com.au\/cdn\/shop\/products\/t11-directional-silicon-pad-01.jpg?v=1521760434"],"featured_image":"\/\/borderlifting.com.au\/cdn\/shop\/products\/t11-directional-silicon-pad-01.jpg?v=1521760434","options":["Colour"],"media":[{"alt":null,"id":746230055002,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/borderlifting.com.au\/cdn\/shop\/products\/t11-directional-silicon-pad-01.jpg?v=1521760434"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/borderlifting.com.au\/cdn\/shop\/products\/t11-directional-silicon-pad-01.jpg?v=1521760434","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003e300 x 600 Directional silicon Tactile Tacpads supplied with surface primer \u0026amp; adhesive. Available colours  yellow, grey, white, blue \u0026amp; terracotta.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFloorsafe 300mm x 600mm x 7mm Hazardous \u0026amp; Directional Tactile pads meet the requirements of the Australian standard AS\/NZS4586:2004. Tacpads are an effective and cost-saving way of providing guidance cues. Conforms to the Disability Discrimination Act (DDA) Manufactured to Australian \u0026amp; New Zealand standards 1428.4: 2002 Table 1 Slip tested in accordance with AS\/NZS: 4586:2004 Mean tested BPN 41 Class X Ramp test result R10 Meets the classification Y BPN 25-34 according to AS\/NZS: 4586:2004\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFLEXIBLE \u0026amp; EASY TO INSTALL\u003cbr\u003e\u003c\/strong\u003eFloorsafe silicon coloured tactile Tacpads are supplied with a surface primer \u0026amp; a silicon base adhesive for fast \u0026amp; secured application. Available in 6 colours warning\/hazardous \u0026amp; directional.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSUITABLE SURFACES\u003c\/strong\u003e \u003cbr\u003eSurfaces must be clean \u0026amp; smooth otherwise full bonding will not occur and the pads could lift or bubble. Suitable for smooth concrete, timber, ceramic \u0026amp; vinyl tiles and smooth stone surfaces. We do not recommend installation onto bitumen surfaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eENHANCED BONDING TECHNIQUE\u003cbr\u003e\u003c\/strong\u003eA special primer \u0026amp; adhesive is supplied with the Tacpads. The primer is a white liquid solution that is brushed or rolled onto the surface and left to dry for 10 – 15 minutes before applying the adhesive.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUV STABLE\u003cbr\u003e\u003c\/strong\u003eManufactured from a silicon rubber provides optimum UV stability and wear resistance. No colour fade reported after 48 months\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eOTHER FEATURES\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuaranteed\u003c\/strong\u003e 10 Years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness Shore A\u003c\/strong\u003e 10-90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Strength\u003c\/strong\u003e 11 N\/mm2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElongation at break\u003c\/strong\u003e 100-1100%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum temperature\u003c\/strong\u003e + 300oC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Minimum temperature\u003c\/strong\u003e -120oC\u003c\/li\u003e\n\u003c\/ul\u003e"}
300 x 600 Directional Silicon Pad

300 x 600 Directional Silicon Pad

$65.90

300 x 600 Directional silicon Tactile Tacpads supplied with surface primer & adhesive. Available colours  yellow, grey, white, blue & terracotta. Floorsafe 300mm x 600mm x 7mm Hazardous & Directional Tactile pads meet the requirements of the Australian standard AS/NZS4586:2004. Tacpads are an effective and cost-saving way of providin...

Colour
Blue
Yellow
Grey
White
Terracotta

More Info