wigs for women wig types hair extensions for short hair headband wigs human hair wigs wig types sepia wigs wigs for black women forever young wigs synthetic hair lace wigs wig store human hair falls sherri shepherd wigs lace front wigs best wigs wigs for black women raquel welch wigs lace front wigs human hair wigs wigs for black women wigs for women cheap wigs lace front wigs human hair wigs hairpieces for women
East West Engineering Hydraulic Forklift Attachments


Hydraulic Forklift Attachments Section 1:

  1. XZQ 360 Degree Rotator
  2. XR3 180 Degree Rotator
  3. XR3 180 Degree Rotator with Bin Support Arm
  4. Standard Hydraulic Bale Clamps
  5. GA-06 Grab Attachment
  6. GA-09 Grab Attachment
  7. GA-12 Grab Attachment
  8. Carton Clamp
  9. Paper Roll Clamp
  10. Load Guards

 


 

XZQ 360 Degree RotatorXZQ 360 Degree Rotator

East West Engineering's range of 360 Rotators increases forklift functionality by enabling the operator to rotate loads and empty bins, while retaining the ability to handle palletised and conventional loads.

East West Engineering can supply all sizes and capacities upon request.

*Please note: Tines and connecting hose not included

 

Model
Capacity @ Load Centre (kg@mm)
Mounting Class
Carriage Width (mm)
Min Truck Carriage Width (mm)
Max Fork Spacing OTO (mm)
Vertical Centre of Gravity (mm)
Weight (kg)
Lost Load (mm)
Horizontal Centre of Gravity (mm)
XZQ25E-B002
2500@500
II
1115
800
1030
304
311
160
88
XZQ30D-C001
3000@500
III
1100
800
1030
286
378
228
149
XZQ35D-C001
3500@500
III
1100
800
1030
301
389
226
144
XZQ45D-C001
4500@600
III
1200
1016
1130
359
550
192
145
XZQ60E-D001
6000@500
IV
1200
1016
1021
310
577
235
143

 


 

XR3 180 Degree RotatorXR3 180 Degree Rotator

The XR3 180° Rotator is designed to increase the functionality of your forklift to hydraulically rotate loads 180° while retaining standard forklift use to handle palletised and conventional loads. Ideal for load inverting and dumping applications, the single hydraulic cylinder produces a smooth, high torque rotation while self-lubricating bearings and chrome shafts eliminate maintenance. The XR3-23-3A (class II) and XR3-35-3A (class III) models feature an extra arm for additional load stabilisation.

FEATURES:

• Ideal for load inverting and dumping applications
• 180° rotation used to turn or pour load’s content
• Single hydraulic cylinder produces a smooth, high torque rotation
• Self-lubricating bearings and chrome shafts eliminate maintenance
• One additional hydraulic circuit required

 

Model
Capacity @ Load Centre (kg@mm)
Mounting Class
Carriage Width (mm)
Min Truck Carriage Width (mm)
Vertical Centre of Gravity (mm)
Weight (kg)
Lost Load (mm)
Horizontal Centre of Gravity (mm)
XR3-23
2300@500
II
1040
800
275
240
162
242
XR3-23-3A
2300@500
II
1040
800
275
280
162
242
XR3-35
3500@500
III
1230
800
350
300
192
150
XR3-35-3A
3500@500
III
1230
800
350
385
192
155

 


 

XR3 180 Degree Rotator with Bin Support ArmXR3 180 Degree Rotator with Bin Support Arm

The XR3 180° Rotator with Bin Support Arm is designed to increase the functionality of your forklift to hydraulically rotate a standard nally bin 180° without damaging the bin. Ideal for load inverting and dumping applications, the single hydraulic cylinder produces a smooth, high torque rotation while self-lubricating bearings and chrome shafts eliminate maintenance.

FEATURES:

• 180° rotation used to turn or pour load’s content
• Features a side arm and adjustable top arm to stabilise the load during rotation
• 5 adjustment levels for top support arm opening range is 735, 815, 975, 1055 and 1135mm
• Single hydraulic cylinder produces a smooth, high torque rotation
• Self-lubricating bearings and chrome shafts eliminate maintenance

 

Model
Capacity @ Load Centre (kg@mm)
Mounting Class
Carriage Width (mm)
Min Truck Carriage Width (mm)
Vertical Centre of Gravity (mm)
Weight (kg)
Lost Load (mm)
Horizontal Centre of Gravity (mm)
XR3-23-BHD
2300@500
II
1040
800
275
240
162
242

 


 

Standard Hydraulic Bale ClampsStandard Hydraulic Bale Clamps

East West Engineering's range of Bale Clamps enable forklift operator to clamp unpaletised loads. The Bale Clamp's opening range can be designed to suit multiple load sizes.

East West Engineering can supply all sizes and capacities upon request.

 

Model
Capacity @ Load Centre (kg@mm)
Mounting Class
Opening Range (mm)
Arm Height (mm)
Arm Length (mm)
Frame Width (kg)
Arm Thickness (mm)
Weight (kg)
Lost Load (mm) Horizontal Centre of Gravity (mm)
RBC19D-B002
1900@500
II
440-1730
415
1185
1040
80
430
 128 401
RBC22D-C004
2200@500
II or III
490-2330
460
750
1600
75
610
146 180
RBC27D-C004
2700@500
III
590-2110
460
1181
1200
80
620
150  356 

 

TOP OF PAGE


 

GA-06 Grab Attachment

GA-06 Grab AttachmentThe type GA-06 Grab Attachment has been designed to grab and secure poles or pipes from 170mm to 600mm in outside diameter and safely lift and transport these by Forklift about the worksite. This slip-on attachment can be fitted in seconds to a forklift requiring only the connection to the 3rd function hydraulics, via the quick connect hydraulic couplings, and the installation of two locking pins supplied to prevent the unit from moving off the fork arms.

The standard finish on this attachment is enamel painted over primed steel – colour: ‘Safety Yellow’.

SPECIFICATIONS:

• Safe Working Load (SWL): 2500kg
• Load Centre: 1100mm
• Unit Weight: 245kg
• Pocket Size: 165 x 60mm
• Pocket Centres: 931mm
• Minimum Pole Diameter: 170mm
• Maximum Pole Diameter: 600mm
• HCG: 600mm
• VCG: 210mm

 


 

GA-09 Grab Attachment

GA-09 Grab AttachmentThe type GA-09 Grab Attachment has been designed to grab and secure poles or pipes from 170mm to 900mm in outside diameter and safely lift and transport these by Forklift about the worksite. This slip-on attachment can be fitted in seconds to a forklift requiring only the connection to the 3rd function hydraulics, via the quick connect hydraulic couplings, and the installation of two locking pins supplied to prevent the unit from moving off the fork arms.

The standard finish on this attachment is enamel painted over primed steel – colour: ‘Safety Yellow’.

SPECIFICATIONS:

• Safe Working Load (SWL): 2500kg
• Load Centre: 950mm
• Unit Weight: 265kg
• Pocket Size: 165 x 60mm
• Pocket Centres: 931mm
• Minimum Pole Diameter: 170mm
• Maximum Pole Diameter: 900mm
• HCG: 420mm
• VCG: 300mm

 

TOP OF PAGE


 

GA-12 Grab Attachment

GA-12 Grab AttachmentThe type GA-12 Grab Attachment has been designed to grab and secure poles or pipes from 300mm to 1200mm in outside diameter and safely lift and transport these by Forklift about the worksite. This slip-on attachment can be fitted in seconds to a forklift requiring only the connection to the 3rd function hydraulics, via the quick connect hydraulic couplings, and the installation of two locking pins supplied to prevent the unit from moving off the fork arms.

The standard finish on this attachment is enamel painted over primed steel – colour: ‘Safety Yellow’.

SPECIFICATIONS:

• Safe Working Load (SWL): 2500kg
• Load Centre: 1300mm
• Unit Weight: 375kg
• Pocket Size: 165 x 60mm
• Pocket Centres: 931mm
• Minimum Pole Diameter: 300mm
• Maximum Pole Diameter: 1200mm
• HCG: 580mm
• VCG: 455mm

 


 

Carton ClampCarton Clamp

Carton clamps and appliance clamps are used for handling pressure-sensitive and large-surface goods. Frequent applications are the handling of “white” and “brown” goods, i.e. household appliances and consumer electronic equipment as well as other large-surface goods, such as styrofoam packages. Depending on the application, one arm is oscillating. The rubber-coated pressure pads distribute the clamping pressure evenly over the entire surface of the goods. Thin pressure pads also allow optimal use of storage and loading space.

 

Model
Clamp Capacity @ Load Centre (kg@mm)
Mounting Class
Carriage Width (mm)
Opening Range ITI (mm)
Arm Size (mm)
Weight (kg)
Lost Load (mm)
Horizontal Centre of Gravity (mm)
S16-GFK-15
1500@500
II
1140
500-1800
1000x1000
580
155
310
S16-KK08
800@500
II
950
530-1630
700x1000
480
195
215
S16-KK15
1500@500
II
1140
520-1740
700x1000
525
195
220

 


 

Paper Roll ClampPaper Roll Clamp

Paper roll clamps are intended for handling cylindrical goods. Paper roll clamps operate with one long hydraulically adjustable arm and one short adjustable arm. All clamps have a rotation range of 360° continuous in both directions. The contact pads of the arms can be made to customer specifications. Different types of coating available. Concrete pipe clamps operate with one long hydraulically adjustable arm and one short manually adjustable arm. The rotation range of 360° is continuous in both directions. All clamps are serially equipped with rubber coated contact pads.

 

Model

Clamp Capacity @ Load Centre

Mounting Class

Roll Range

Pad Size

Weight

Lost Load

Horizontal Centre of Gravity

 

(kg@mm)

 

(mm)

(mm)

(kg)

(mm)

(mm)

S18-RK13-360

1300@550

II

250-1100

720X200

470

205

250

 

1100@650

II

250-1300

720X200

490

205

280

S18-RK16-360

1600@650

II

250-1300

720X200

550

210

290

 

1350@750

II

250-1500

720X200

590

210

320

S18-RK20-360

2000@650

III

250-1300

820X230

650

220

305

 

1600@800

III

250-1600

820X230

710

220

350

S18-RK23-360

2300@650

III

250-1300

820X230

690

225

315

 

1850@800

III

250-1600

820X230

750

225

360

S18-RK25-360

2500@700

III

250-1400

820X230

740

230

305

 

2150@800

III

250-1600

820X230

780

230

335

S18-RK32-360

3200@750

III/IV

250-1800

1000X250

1160

255

320

 

2650@900

III/IV

350-1800

1000X250

1240

255

370

S18-RK40-360

4000@900

IV

350-1800

1000X250

1510

285

355

 

3400@1050

IV

350-2100

1000X250

1630

285

390

S18-RK50-360

5000@950

IV

400-1900

1200X280

1840

295

395

 

4500@1050

IV

400-2100

1200X280

1890

295

410

 

TOP OF PAGE


 

Load guards

Load guardsLoad Guards are designed to be mounted to the forklift carriage to protect both the forklift and load being transported. Load Guards can be custom made to suit your forklift and load requirements.

If our standard models do not suit, East West Engineering will design a Guard to meet your needs.

The standard finish on all Load Guards is painted enamel on primed steel.

SPECIFICATIONS:

• High Strength
• High Visibility
• Standard Models shown
• Custom Sizes available

 

 

Main Menu


best rabbit vibrator for sale good vibrators for women Sex toys for men adult sex toys online sex shops near me and you best rabbit vibrator for sale best rabbit vibrator for sale good vibrators for women good vibrators for women best rabbit vibrator for sale good vibrators for women best rabbit vibrator for sale strap on female toys small strap on strap on handcuffs sex strap on vibrators for women adult shop online good Vibrators vibrators for women